Products
-
STYX Plus
More infoSTYX Plus
STYX Plus is a brand new 4th generation gas computer for petrol cars. Main advantages are a compact case design, robust and modern electronics solutions, intelligent gas injection algorithm and friendly user interface.
STYX Plus – only benefits!
Device features:
- Designed for 3-4 cylinder engines
- Works with LPG and CNG gas types
- Compact case design
- Easy installation
- Powered by a car battery, and has wire after ignition key
- Increased noise rejection electronics
- 32-bit processor provides a fast and highly accurate petrol signal processing
- …
-
TMAP 4in1
More infoTMAP 4in1
TMAP 4in1 is a digital pressure and temperature sensor for gas injection computers STYX, STYX Plus and STYX Pro.
Device features:
- gas pressure measurement;
- manifold pressure measurement;
- gas temperature measurement;
- reducer temperature measurement.
-
DIN S1
More infoDIN S1
DIN S1 is a digital device that indicates states of gas injection system and shows gas level in the tank. Gas level is displayed in percentage from 0 to 99 %.
ATTENTION: The digital indicator DIN S1 only works in conjunction with the systems Styx, Styx Plus, Styx Pro and remote control PULT S1.
-
Bluetooth S1
More infoBluetooth S1
Bluetooth S1 is a universal and robust diagnostic Bluetooth adapter for gas injection system installation.
Device features:
- Bluetooth v2.0;
- Power supply voltage 12 V;
- Maximum communication speed 9600 bit/s;
- It works with other manufacturers of gas injection systems.
-
USB S1
More infoUSB S1
USB S1 is a universal and robust diagnostic USB adapter for gas injection system installation.
Device features:
- Optical isolation;
- Power supply voltage range 5 – 12 V;
- Maximum communication speed 115200 bit/s;
- It works with other manufacturers of gas injection systems.
-
TGstream PMR
More infoTGstream PMR
TGstream PMR
ATTENTION: In this device fuel injectos emulation is done by relays, it this case you can not use fuel enrichment function.
- FCI hermetic connection
- Tiny remote control with indication
- Standard interface cable for connecting ECU and PC
- Sequential Gas Injection
- Possibility to operate with multipoint simultaneous petrol injection and monoinjection
- Smooth (injector-by-injector) switching from petrol to LPG
- Forced starting on gas
- …
-
K-5
More infoK-5
Change-over switch K-5
Petrol-gas switch K-5 is applicable for use in automotives on Liquified Petroleum Gas (LPG), with electromagnetic valve gas pressure reducer, carburettor and +12V supply. K-5 has yellow and green LEDs on the front panel.
-
PG-3
More infoPG-3
Change-over switch PG-3
PG-3 is versatile change-over switch for use in vehicles with Liquified Petrolem Gas (LPG) whose parameters to be adjusted during installation. The microprocessor of the switch lets the installer or driver set required configuration. The electronic keys protect PG-3 outputs from possible mistakes in connection. Front panel has 5 LEDs (yellow, red and 3 green) and two control buttons. The switch memorizes last settings.
-
GAS alarm
More infoGAS alarm
Gas escape sensor
Gas escape sensor GasAlarm is intended for installation onto cars in order to prevent fire which could occur due to broken or defective hoses, reducers and other possible reasons. If gas concentration achieves certain limit within checked area this device blocks active valve, i.e. prevents concentration from dangerous value.
-
TGstream 4P
More infoTGstream 4P
Device TGstream 4P is 4th generation controller of multipoint gas injection designed for petrol cars.
TGstream-4P and TGstream-6P are identical devices to TGStream-4 and TGstream-6, the only difference is housing, plastic or aluminum.
Device features
- FCI hermetic connection
- Tiny remote control with indication
- Standard interface cable for connecting ECU and PC
- Sequential Gas Injection
- Smooth (injector-by-injector) switching from petrol to LPG
- Forced starting on gas
-
Solaris SM
More infoSolaris SM
Universal frequency converter Solaris SM
Variable Frequency Driver „Solaris SM“ is designed to be used with AC induction motors that are rated from 550 W up to 3 kW with voltages range 380-400 V. VFD is compact, easy to use, ready for many applications. Because of low price „Solaris SM“ can replace motor soft starting systems or motor protection systems.
Model modifications:
SM-TT
- Input: 3 phase AC 380…480 V, 50…60 Hz
- Output: Modulated 3 phase 0…480 V, 0…100 Hz
SM-SS
- Input: 1 phase AC 230 V, 50…60 Hz
- Output: Modulated 1 phase 0…230 V, 0…100 Hz
SM-ST
- Input: 1 phase AC 230 V, 50…60 Hz
- Output: Modulated 3 phase 0…230 V, 0…100 Hz
Features:
- Input phase sequence protections, input voltage too low/high protections.
- Motor overload, underload, overcurrent protections.
- Output frequency from 0.1…100 Hz
- Scalar V/f frequency control.
- Selectable carrier frequency up to 15 kHz
- Remote control with 0-10V or 4-20mA signal
- PID control
- Frequency control from RS485 Modbus RTU
- …
-
Wireless switch DJ-01
More infoWireless switch DJ-01
Wireless package of lighting control DJ-01
The package of lighting control DJ-01 is appointed for the lighting control in the room remotely (radio waves). It consists of receiver and one transmitter (controller). Encoded control signal is transmitted from the transmitter to receiver by the radio waves. The relay is toggled in the receiver after the decoding. For receiver to work it’s necessary to record the transmitter of the remote control to the memory of receiver (register). The amount of transmitters is up to 30pc. The receiver is of small dimensions (48x42x22mm), that allow to install it in the lamp corps or aside. The construction of transmitter is constructed as the light switch, which is powered by separate power battery (CR2032) that is why it’s possible to install it (or several transmitters) in any esirable place.
-
Fors-4-100
More infoFors-4-100
Fors-4-100 and Fors-6-100
Injector emulators are used in vehicles on Liquified Petroleum Gas (LPG) with fuel injection of Bosch type for 4-cylinders engines. At switching on LPG emulator does not let burners be open what cuts off petrol feed. At the same time, vehicle diagnostic system does not detect burners cutting off and does not make any changing in engine performance.
-
TGstream 4/6/8
More infoTGstream 4/6/8
Device TGstream is 4th generation controller of multipoint gas injection designed for petrol cars.
TGstream-4P and TGstream-6P are identical devices to TGStream-4 and TGstream-6, the only difference is housing, plastic or aluminum.
Device features
- FCI hermetic connection
- Tiny remote control with indication
- Standard interface cable for connecting ECU and PC
- Sequential Gas Injection
- Smooth (injector-by-injector) switching from petrol to LPG
- Forced starting on gas
-
TGstream PM
More infoTGstream PM
TGstream PM
- FCI hermetic connection
- Tiny remote control with indication
- Standard interface cable for connecting ECU and PC
- Sequential Gas Injection
- Possibility to operate with multipoint simultaneous petrol injection and monoinjection
- Smooth (injector-by-injector) switching from petrol to LPG
- Forced starting on gas
- …
-
ProGas 4P
More infoProGas 4P
Multipoint Gas Injection system ProGAS
System ProGAS is the controller of multipoint gas injection. It could be installed on to the cars with following types of fuel injection:
- Multipoint phased petrol injection into engine manifold.
- Multipoint coupled petrol injection into engine manifold.
- Multipoint simultaneous petrol injection into engine manifold.
- Monoinjection of petrol into engine manifold.
ProGAS consists of: main unit which is installed in engine compartment, temperature and pressure sensors, installation kit and remote control which is installed in passenger compartment in handy place. ProGAS memorizes last performance mode: “AUTOMATIC” or “PETROL”. It is provided forced starting on gas . There are light and sound indication of the status and system modes.
-
ZOND-4
More infoZOND-4
Lambda sensor emulator-corrector ZOND-4
The oxygen sensor emulator-corrector ZOND-4 correct operation of the Lambda Sensor when the car is running on GAS.
-
IN-3
More infoIN-3
Change-over switch “IN-3”
Petrol-gas change-over switch IN-3 is applicable for use in cars on Liquefied Petroleum Gas (LPG), with electronic pressure reducer, fuel injection and +12V supply. Front panel has yellow and green LEDs and control button. It has possibility to program sensitivity threshold what widens its field of application. There is possibility to restore factory’s settings what lets to makes free experiments without fear of deregulating the switch. The switch has 3 operation modes and 3 programming modes.